Pioneer DJM-900NXS Mode D'emploi page 19

By pressing the [LFO FORM (WAKE UP)] button, MIDI-compatible software and
devices can be controlled using MIDI signals.
1
SND/RTN
Connect an external effector, etc., here.
SEND
RETURN
0
9 9 9 9
0
0
-26 / 6 -26 / 6 -26 / 6 -26 / 6
12 12
12 12 -26 / 6 -26 / 6 -26 / 6 -26 / 6
TALK
OFF ON OVER
-26 / 6 -26 / 6 -26 / 6 -26 / 6
DJM-900nexus
, buttons (param-
BEAT
—
eter 1)
TIME control (parameter 2) —
LEVEL/DEPTH control
This adjusts the sound level input to the [RETURN] terminal.
(parameter 3)
X-PAD (parameter 4) —
MIDI LFO
The MIDI signal (0 – 127) waveform is changed according to the track's tempo.
The MIDI signal waveform pattern switches each time the [LFO FORM (WAKE UP)]
button is pressed.
, buttons (param- Use these to set a waveform output time of 1/4 – 64/1 with
BEAT
eter 1) respect to one beat of the BPM.
TIME control (parameter 2) Use this to set the waveform output time.
LEVEL/DEPTH control
—
(parameter 3)
X-PAD (parameter 4) This changes the MIDI signal's waveform pattern.
When [MIDI LFO] is selected, the sound of the external effector connected to the [RETURN]
terminal is not input.
1 If the sound of the channel you want to monitor is not output from the [MASTER]
channel when [CF.A], [CF.B] or [MASTER] is selected with the [1, 2, 3, 4, MIC,
CF.A, CF.B, MASTER] selector switch, the effect sound cannot be monitored even
by pressing the [CUE] button for [BEAT EFFECTS].
2 If the effect is off, the effect sound cannot be monitored even by pressing the [CUE]
button for [BEAT EFFECTS].
Effector
19
En