Electrical Connection; Guarantee - ROSIERES VG 40 Notice D'emploi Et D'installation

___________________________________________________________________________
INSTALLATION - ELECTRICAL CONNECTION
___________________________________________________________________________________
"The installation must be in conformity with standard directives".
Rosières declines all responsabiity for any damage that may be caused by unsuitable or
unreasonable use.
Connection to the power supply should be made through an earthed, three-pin wall socket
or an omnipole cut-out switch with an opening gap of at least 3 mm.
The electrical installation should be protected by a fuse, properly earthed, and includes wires
of a sufficient section to supply the product correctly.
This appliance is supplied with main cable as well as a plug allowing exclusively the
connection at voltages of 220-240 V between phases or between phases and neutral.
Connect on a plug with 10/16 A after checking voltage indicated on the meter, the setting of
the circuit-breaker and the calibre of fuse (10 A).
Attention : always check the continuity of the connection to the installation before any
electrical operation. Rosières cannot be held responsible for any accidents resulting from the use
of an appliance which is not connected to earth, or as a faulty earth connection continuity.
For any matter relative to the supply cord, ask for After sales service or for a qualified
technician.
___________________________________________________________________________

GUARANTEE

___________________________________________________________________________________
The guarantee contract consists simply and solely in exchanging or replacing any part
considered by us to be defective, or repairing it after examination by our Technical Assis-
tance, to the exclusion of all other indemnities of whatever kind.
Duration : the appliance is guaranteed for one year from the date of delivery to the first purchaser.
Conditions :the appliance should only be used for the purposes for which it has been designed
and as described in this booklet. You should always contact your installer who is responsible for
After-Sales service and who sold you the appliance. The removal expenses, costs of transport,
labour, packing resulting from guarantee operations will be taken in charge by the user or by the
installer according to the conditions of sale.
After the guarantee : get in touch with the retailer who sold you the appliance. They will
immediately place on order with our Parts Department for the required components.
Legal guarantee : the conditions of guarantee do not affect your statutory rights.
When making a claim, or when ordering a part, tell your retailer the exact type of
appliance and the serial number shown on the specification plate, and the name of the part,.
To be certain of getting the correct specification, guaranteed for maximum reliability and safety,
ask scpecifically for "CERTIFIED MANUFACTURERS PARTS".
24 -