Volete avviare il circuito sanitario "ACS"?
(Solo con RMH760B)
Prerequisiti
L'impianto deve essere avviato da personale
specializzato.
When the preconditions are met, DHW heating is ready
to be started. Select menu option Preselection and then
select operating mode
and energy-saving operating mode.
The following choices are available:
Simboli
Modalità operativa
Automatico
Normale
Ridotto
Protezione
16
Building Technologies / HVAC Products
. This is the recommended
Descrizione
Il setpoint dell'accumulo ACS commuta da normale a ridotto o viceversa
secondo il programma orario impostato
Il setpoint dell' accumulo ACS è costante a temperatura normale
Il setpoint dell' accumulo ACS è costante a temperatura ridotta
Il circuito ACS è escluso, resta attiva la protezione antigelo
dell'accumulo ACS
Percorso:
Menù Principale > ACS > Regime funz. ACS > Preselezione
CE1B3133x1-it
Guide value
55 °C
40 °C
5 °C
74 319 0559 0 a
10.10.2006