Dyson Pure Hot+Cool Link Guide D'utilisation page 8

Replacing the filter unit
1 2
When your non-washable filter unit needs
replacing the appliance will display the pattern
shown. To replace the non-washable filter
unit, follow these steps. Ensure your appliance
is unplugged. Your Dyson appliance is
programmed to remind you to replace the filter
unit after 12 months based on 12 hours usage
a day. Please note your indicator will activate
sooner with more use. The indicator is only a
guide and you may need to replace the filter
unit more regularly.
4 5
7 8
14
Replacing the filter unit
3
6
9
clik clik
10 11
clik
13
A clockwise-rotating loading pattern will
be shown on the LED display.
When you have re-assembled your appliance, press and hold the 'Standby ON/OFF'
button for 6 seconds on the remote control to reset the filter indicator.
6 sec
The Dyson Link app will notify you when your non-washable filter needs to be replaced.
The filter indicator can also be reset from within the Dyson Link app.
12
Clean the hatch every time the filter
is replaced. Open the small hatch on
the side of the appliance. Use a cotton
swab to clean inside and remove any
debris. This maintains sensor accuracy
and ensures the continuing high
performance of the appliance.
clik
Once the loading pattern is complete,
the appliance will return to its normal
usage.
15