VALBERG MFO 65 C X 701T V2 Consignes D'utilisation page 19

C
Cleaning and maintenance
3. Close the door until it almost reaches the fully closed position
and remove it by pulling it towards you.
WARNING: This unit must be maintained by licensed
persons or a qualified technician.
Replacing the oven light
WARNING: Turn off the unit and let it cool before cleaning.
• Remove the glass lens cover, then remove the bulb.
• Insert the new bulb (resistant to 300°C) to replace the one you've
removed (230 V, 15-25 Watt, Type E14).
• Reposition the glass lens cover. Your oven is now ready to
operate.
• The product contains a light source with a G energy efficiency
rating.
• The light source cannot be replaced by the end user. After-sales
service is required.
• The included lighting source cannot be used in other applications.
The light source can be
replaced by a professional
17 EN