DBI SALA ExoFit NEX Manuel D'instruction Pour L'utilisateur page 10

Figure 11 - Donning the ExoFit NEX™ Vest Style Full Body Harness
Step 1
Connection: Connect buckle ends by inserting
the tab into the receptor until a click is heard.
Strap Adjustment: Rotate Webbing Lock
to unlocked position
Rotate Webbing Lock to locked position .
NOTe: The Webbing Lock does not control
engagement or disengagement of the buckle ends.
Step 4
To Tighten: Turn Ratchet Knob clockwise.
To loosen: Pull Ratchet Knob out and turn
counterclockwise while pulling strap.
NOTe: After adjustment, ensure that the ramped
teeth on the adjuster are engaged in the ratchet
slots.
Step 2
Duo-lok™ Quick Connect Buckles
. Pull strap to adjust.
Revolver™ Vertical Torso Adjusters
10
Step 3
Step 5