Technical Data - ABB IPM/S1.1 Mode D'emploi

Technical data

Mounting adapter
Housing
Weight
Module
Poles
IDC terminals
Mechanical characteristics
Housing of shielding
Shielded connection
Operating-/storage temperature
Protection
Connection
Electrical characteristics
Nominal voltage
Operating current
Color code
Transmission characteristics
ISO/IEC 11 801 Amendment 2
E DIN IEC 60 603-7-51 Ed.1
PA
25 g
8-pin
8
Zinc diecast
360° contact, contact bridge for data cable with Ø 6–10 mm,
strain relief via cable ties
-40 °C to +70 °C
IP21 according to EN 60 529
IDC terminals for a conductor 0.51–0.63 mm Ø, AWG 24–22,
outside Ø 0.7 - 1.6 mm at PE, 1 wire/contact, reusable  10
times
72 V DC, suitable for TNV current circuits according to EN 60 950-1
500 mA, suitable for PoE+ (Power over Ethernet) acc. to IEEE 802.3at
T568A and T568B according to TIA/EIA-568-B.2
Cat.6 A , Class E A , shielded
500 MHz, shielded
7