Bid Chip / Key; Using A Bid Chip / Key - ROBBE Power Peak B7 EQ-BID Notice D'utilisation

7.

BID ChIP / kEy

Bid C:2.5A
LP 2S
the charger switches to the mode for charging / discharging a battery with BID chip or key,
or for programming a BID chip or key. All parameters for the battery, for which this chip is
to be used, can be set from this initial menu. It is also possible to read out stored charge or
discharge values (see Section 8.3). When a BID chip or key is disconnected, the charger
leaves the programming menu and reverts to the Start screen.
7.1 USING a BID ChIP OR kEy
The BID chip or key is so compact that it can conveniently be kept with the charger. The
photos illustrate the use of a BID chip and a BID key.
Operating Instructions
Power Peak ® B7 EQ-BID
As soon as a BID chip or key is connected to the char-
D:2.0A
ger from the Start display or any other menu in the
2500mAh
Setup level
14