Denon Professional DN-500DC Guide D'utilisation page 6

Setup
Important: Connect all cables securely and properly (with stereo cables: left with left, right
with right), and do not bundle them with the power cable.
1. Use XLR cables or stereo RCA cables to connect the Audio Outputs (balanced or
unbalanced) to the analog inputs of your external receiver, amp, powered monitors, etc.
2. To manage DN-500DC using serial communication, connect the RS-232 Remote Input
to your computer using a 9-pin D-Sub cable. Use a third-party utility to manage DN-
500DC.
3. After completing all the connections, use the included power cable to connect the AC In to
a power outlet.
4. Power on DN-500DC.
Example
Powered Monitors
Items not listed under
6
Introduction > Box Contents
Zone Mixer
are sold separately.
Power