Maximum Weight Of Removable Parts; Materials - Invacare Alu Lite Manuel D'utilisation

Invacare® Alu Lite
Footrest to seat distance
Leg to seat surface angle 60°
Armrest to seat height
Front location of armrest
structure
Horizontal location of
axle
Minimum turning radius
Stowage width
Stowage height
Stowage length
Overall length without
leg rests
Overall height
Pivot width
Maximum slope angle
brake
36
345 – 465 (340 – 460) mm,
stepless
280 (230) mm
500 mm
+ 80 mm
880 mm
290 mm
760 mm
690 mm
760 mm
955 mm
1220 mm
7°

11.2 Maximum Weight of Removable Parts

Maximum weight of removable parts
Part:
Swing away leg rest

11.3 Materials

Frame/backrest tubes
Upholstery (seat and backrest)
Push handles
Plastic parts like brake handles,
clothes guards, foot plates,
armpads and parts of most
options
Folding mechanism / vertical
brace / clamping parts / castor
forks
Screws, washers and nuts
All materials used are protected against corrosion.
We use only REACH compliant materials and
components.
Theft and metal detection systems: in seldom cases
the materials used in the wheelchair may activate
theft and metal detection systems.
Maximum weight:
0,73 kg
Aluminum, Steel
Foam PUR, Fabric Nylon
and Polyester
PVC
Thermoplastic (e.g.
PA, PP, ABS and PUR)
according to marking
on the parts
Aluminum, Steel
Steel
1648363-B