Leg Rests; Swing Away Leg Rests - Invacare Alu Lite Manuel D'utilisation

Invacare® Alu Lite

3.6 Leg rests

WARNING!
Risk of injury
– Never lift the wheelchair by the footrest
supports or leg rests.
CAUTION!
Risk of pinching or crushing fingers
There are swing mechanisms where you could
trap your fingers.
– Be careful when using, swinging, disassembling
or adjusting these mechanisms.
IMPORTANT!
Risk of damage to the leg rest mechanism
– Do not place anything heavy, or let children
sit on the leg rest.

3.6.1 Swing away leg rests

14
Swing outwards
1. Activate the release lever A and swing the leg rests
to the outside.
Swing forwards
1. Swing the leg rest forwards until it engages.
Unhinging
1. Activate the release lever A.
2. Pull the leg rest upwards.
Hinging
1. Hinge the leg rest on the front of the frame and swing
it forwards until it engages.
Foot plate height adjustment
1. Loosening the fixing bolt B with 13 mm spanner.
2. Adjust and tighten the fixing bolt (10 Nm) B into the
desired position.
Invacare recommends that footplate adjustment is carried
out by a qualified technician.
To ensure a good position of the feet the heel strap
is attached to the leg rest support and adjustable by
hook and loop fasteners.
1648363-B