Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
fixed wire network . The overcurrent protection of the isolation
switch must be ensured using a miniature circuit breaker .
• The current of the electric system has to be connected to the
container through a two-pole switch installed in the fixed
wire network with at least 3mm separation distance between
open poles .
• The first heating cycle must be supervised by a professional .
• The electrical safety cover may not be removed, but by a pro-
fessional; failure to observe this may lead to electrical shock
or other dangers .
• To ensure safe operation it is recommended to regularly (eve-
ry year) have the appliance and the combined safety valve
checked by a plumber for proper operation . Additionally, it
is also recommended to blow off the valve every two months
by turning the blow off button of the safety valve in the direc-
tion indicated by the arrow . This way, the valve seat will be
cleaned of any possible deposit (scale, sand grains etc .) .
• If the mains cable is damaged, it must be replaced in order to
avoid any danger . Such replacement must be performed by
the manufacturer, its service support or a similarly qualified
professional .
SERVICING
For regular inspections or if the appliance fails, contact our authorized
Hajdu service stations, whose list is included in the List of Service Stations
Contact details of our customer service:
Email: customerservice@hajdurt .hu
ENVIRONMENTAL PRECAUTIONS
Please, note that, due to its decomposition attributes, the product you
purchased may damage the environment, and in particular the soil and
ground water after its useful lifecycle, given that it contains parts (e .g .
wires, battery), for which the product is considered hazardous waste .
When disposing of the appliance, remove the battery and take measures
for its proper disposal . Please, when reaching the end of service life, do
not dispose of the product along with the communal waste, but arrange
for its transportation to a company collecting electrical wastes or the
manufacturer . By taking measures for the proper processing or recycling
of the product after its useful lifecycle, we may promote together the
protection of the environment .
EN
3 2 1
Publicité
Table des Matières
