SilverCrest SDQWC A1 Instructions D'utilisation Et Consignes De Sécurité page 15

3. Place the mobile device on the Qi charging
surface 1
of the device is aligned over the center of the
Qi charging surface. Charging will begin on
contact. The LED indicator 1
when charging is active on Qi charging surface
1 . The LED indicator 2
1
when charging is active on Qi charging surface
2 4 .
You can charge up to two Qi enabled mobile
devices at the same time. Place your mobile
devices on the Qi charging surfaces as shown
in the sketch, the maximum wireless charging
power is 10 W each.
16 GB/IE/NI
1 or 2 4 . Make sure the center
lights up blue
2
lights up blue
3