Accessories - Bosch HDD80050UC Instructions D'installation

ACCESSORIES

Flexible Blower
Bosch DHG602DUC
MODEL DESCRIPTION
Non-Duct Recirculating Kit
Used in applications where ducting is
not feasible or available. Mount to toe
kick or base of a cabinet and attach
directly to DHG602DUC Flexible Blower
using 8" (203mm) round duct. Kit can be
rotated so that the exhaust is not directly
HDDREC5UC
at your feet. Includes decorative cover
HDDFILTUC
plate.
(replacement fi lter)
Rough-in Plate - 6" (152mm) Round
Use for applications where 6" (152mm)
round duct or elbow attaches to front
of airbox (inline or remote blower
installation).
HDDFTRAN6
Rough-in Plate - 8" (203mm) Round
Use for applications where 8" (203mm)
round duct or elbow attaches to front
of airbox (DHG602DUC inline blower
installation).
HDDFTRAN8
Gas Cooktop Seal Kit - 30-in. (762mm),
36-in. (914mm)
Used to provide seal between gas
cooktop and downdraft. Also includes
cabinet hole cover plates. Two grilles are
HDD0RSP
provided in the kit, you may only need
HDD6RSP
one for your specifi c installation.
Rectangular Duct - 2-ft. (0.6m) sections
(1-7/8" x 19"/48mm x 483mm) Galvanized
steel construction 2-ft. (0.6m) sections
can be connected together.
HDD2RECTD
Rectangular Adapter for
1-7/8" x 19" (48mm x 483mm)
Use to connect 1-7/8" x 19" (48mm x
483mm) rectangular duct directly to
downdraft when using side or rear
HDDSTRAN2
exhaust.
English 12
(purchase separately)
Inline and Remote Blowers
Bosch Models DHG6023RUC, DHG6015NUC
MODEL DESCRIPTION
1-7/8" X 19" (48mm x 483mm) to
6" (152mm) Round
Transition
Rectangular to 6" (152mm) round
transition for left, right, or rear exhaust -
using Model DHG602DUC Flex Blower.
Can be attached to downdraft unit or
rectangular duct (HDD2RECTD).
HDDSTRAN6
1-7/8" X 19" (48mm x 483mm) to
8" (203mm) Round
Transition
Rectangular to 8" (203mm) round
transition for left, right, or rear exhaust -
using Inline or Remote Blower. Can be
attached to downdraft unit or rectangular
duct (HDD2RECTD).
HDDSTRAN8