Listening In Surround Sound; Using The Surround Modes - Pioneer XW-HT1 Mode D'emploi

04

Listening in surround sound

Chapter 4
Listening in surround sound

Using the surround modes

You can listen to any source using the
different surround modes, but the modes
available depend on which input source you
are listening to (DVD or TV).
Important
• Since the surround modes work in
conjunction with the corresponding input
DVD TV
( or
doesn't correspond with the input source,
you won't hear any sound from the unit.
Setting an appropriate volume for
the wireless speaker
It's easiest to set the volume for the wireless
speaker using the W.STEREO surround
mode. After setting the level in this mode, it
should only require small adjustments when
using the other modes.
1 Switch on your TV.
2 Start playback of your source.
If you are using your TV or mini component as
a source, switch to a broadcast channel or
start a playback source such as a CD.
If you are using a DVD player as your source,
load a disc and start playback.
3 Switch on the wireless speaker.
POWER
OFF ON
18
En
), if the mode you've selected
4 Select the W.STEREO surround mode.
Press (TV) W.STEREO if your source is your
TV or mini component; press (DVD)
W.STEREO if your source is your DVD player.
SURROUND MODE
DVD TV
VOLUME CS CS W.STEREO CINEMA MUSIC W.STEREO WIRELESS ATT/
CINEMA MUSIC OFF MUTE
1 2 3 4
CHANNEL
5 Adjust the volume level of the
wireless speaker so that it is about the
same level as your TV (or mini
component).
or
DVD input surround modes
Use these modes to enjoy surround sound
from the wireless speaker when using the
DVD input as your source.
SURROUND MODE
CSII CINEMA CSII MUSIC
CINEMA
(DVD) (TV)
W.STEREO W.STEREO
VOLUME
TUNED OFF POWER ON
DVD
W.STEREO
TV
MUSIC W.STEREO