Application Limits - DPS-Promatic EVD RS232 DRIVER Manuel D'utilisation

8

APPLICATION LIMITS

1- This product has been manufactured to be used by expert people which shall
install it according to the main safety rules and shall connect it to a system fitted
with suitable protection circuit (earth).
2- Do not use the product in wet places.
3- For checkinbg the electromagnetic emissions in compliance with the EMC
89/336/EC directive, a 2 m long cable was used. For higher lengthes, the use of
shielded cables is recommended.
4- The product has been designed to function properly in low-cost applications. For
those applications where an absolute safety and continuity is required (medical
monitoring systems, monitoring systems in general), the installation of alternative
safety systems to be used in case of malfunctioning of the appliance should be
provided for.
In case of faulty product, the Manufacturer's responsibility is limited to the repair
and/or substitution of the product itself.
5- The software controls several functions which, when used in combination, may
result in troubles which have not been detected by now.
In this specific case, the Manufacturer's responsibility is limited to rectify these
defects.