Filling The Clean-Water Tank; Fill Level Indicator - Numatic TTB 1840 Mode D'emploi

Filling the clean-water tank

The TTB 1840 is equipped with a large 15 litre clean-water tank allowing large areas to be cleaning in a single fill.
Note:
Great care must be taken to ensure that contaminants (leaves,hair, dirt, etc) are not allowed to enter the
clean-water tank during the filling process.
If using a bucket or similar, ensure it is always clean and free from debris.

Fill Level Indicator

Fill the clean-water tank to a maximum of 18 litres, including cleaning chemicals if required.
Follow chemical manufacturing guide lines.
This allows the machine to be tipped back and moved without spillage (see page 28).
Use the fill indicator
(Fig.12)
Machine Set-Up
To fill the clean-water tank, remove the filler cap (Fig.10).
Fig.10
Fill using either a hose, bucket or a suitable container (Fig.11).
Fig.11
Fig.12
Showing the clean-water tank empty
Fig.13
(Fig.13)
24
Showing the clean-water tank full
(Fig.13a)
Fig.13a