Pole Hedge Trimmer; Residual Risks; Maintenance - IKRA IECH 1000 Manuel D'utilisation

Outil de jardin multi-fonctions 2 en 1
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 37

Pole hedge trimmer

This hedge trimmer is only for cutting shrubs, Bushes,
ornamental plants and hedges determined. The The
maximum branch thickness to be cut must not be 19 mm
exceed. The use of the hedge trimmer is for determines
the private garden area. The user of the Hedge trimmer
has adequate protective equipment during use according
to the instruction manual and the one attached to the
machine To worry about warning pictograms. Before each
use or while the hedge trimmer is in use, this is for any
electrical or mechanical damage to consider.
If damage to the machine is found, the Stop work and
contact a specialist workshop.
WARNING
Risk of injury
The hedge trimmer may not be used to cut grass, hard
brushes and wood or to crush material for composting
purposes.
No changes may be made to the device. This can endanger security.
This device may only be used as intended. Not observing general regulations in force and instructions from
this manual does not make the manufacturer liable for damages.
Please note that our devices were not designed for commercial, craft or industrial use. We do not assume
any guarantee if the device is used in commercial, craft or industrial companies as well as for similar activities.

MAINTENANCE

DANGER!
Take the replaceable battery from the appliance
before any extension, cleaning and servicing
works. Wait until all rotating parts have stopped and the
appliance has cooled down.
Keep the device, in particular the air vents, clean at all
times. Never spray water on the device body! Never clean
the machine and its components with solvents, flammable
or toxic liquids. Us only a damp cloth making.
Use only original accessories and original spare parts.
Using other spare parts can result in accidents/injuries of the
user. The manufacturer will not be liable for any such damage.
Please contact our service department if you need acces-
sories or spare parts.
When ordering spare parts, provide the following information:
• Device type
• Device article number:
Only a regularly maintained and treated appliance can
serve as a satisfactory aid. Insufficient maintenance and
care can lead to unforeseen accidents and injuries.
Repairs and works specified in these Instructions may only
be performed by qualified authorised staff.

Residual risks

Even if the tool is used correctly there always remains a
certain residual risk, which is not excluded can be. From
the type and construction the tool may have the following
potential hazards be derived:
• Contact with the unprotected shaving blade (cuts)
• Reaching into the running hedge trimmer (cut injury)
• Unexpected, sudden movement of the Material to be cut
• Throwing away faulty shear teeth
• Throwing away parts of the material to be cut
• Damage to the hearing if not prescribed Hearing
protection is worn
• Inhalation of clippings
NOTE
Avoid using the engine at full power for the first 6-8
working hours.
Keep your chain saw professionally maintained and safe.
Sharpening the chain safely is a skilled task. Therefore,
the manufacturer strongly recommends that a worn or
dull chain is replaced with a new one, available at your
service agent. The part number is available in the product
specification table in this manual.
Follow instructions for lubricating and chain tension
checking and adjustment.
Lubricate at intervals of 50 hours via the lubricating
nipple.
Use lithium-based lubricating grease for high tempera-
tures and pressure values to lubricate your machine.
After each use, clean the machine with a soft dry cloth.
Remove any chips, dirt and debris in the battery bay.
Check all nuts, bolts, and screws at frequent intervals
for security to ensure the machine is in safe working
condition. Any part that is damaged should be properly
repaired or replaced by an service station.
Is the device or power cord from the battery charger
immediately damages the power plug or battery pull.
Repairs may only be carried out by an authorized
Specialist company. By improper Repairs can pose
significant risks to the user arise.
GB
ENGLISH
35

Publicité

Table des Matières
loading

Table des Matières