Right Side; Bottom; Basic Functions; Home Screen Overview - Tascam DR 100 MK III Mode D'emploi

z HOLD switch
(speaker) switch
x

Right side

Battery compartment (AA batteries)
c
v SD card slot
Input level knob
b

Bottom

n Tripod mounting threads (1/4-inch)
REC indicator
m

Basic functions

Home Screen overview

Stopped/playing
Recording/recording standby
Input source
1
2 Input channel indicator
Low cut filter status
3
4 Phantom power supply status
Power supply status
5
6 File format
Playback speed/loop playback status
7
Transport status (stopped/playing)
8
9 Loop playback IN/OUT point indicators
Level meters
0
q Playback folder name
Playback file name
w
e Playback time/remaining playback time
Playback position
r
Peak value in decibels (dB)
t
y Recording format
Recording function information
u
i Transport status (recording standby/
recording)
o Level meters
Recording folder name
p
a Recording file name
Recording time/remaining recording time
s
Recording position
d
f Peak recording level in decibels (dB)
Input levels
g

Basic menu operation procedures

Open the MENU Screen.
1.
Press the MENU button.
Select a menu item.
2.
Use the wheel to select the item, and press the
ENTER/MARK button to show the settings.
Select a setting item.
3.
Use the wheel to select the item, and press the
ENTER/MARK button to show the setting values.
NOTE
• If the setting values are only ON and OFF, you
can switch them without selecting from a list.
• Press the . button to return to the previous
screen.
Select a setting value.
4.
Use the wheel to change the setting, and press the
ENTER/MARK button to confirm it.
NOTE
• Press the . button to cancel an operation.
• Press the HOME button to return to the Home
Screen.
TASCAM DR-100MKIII
7