Playing Recordings; Deleting Files; Connecting With A Computer - Tascam DR 100 MK III Mode D'emploi

Playing recordings

8 Starting playback
Press the PLAY/PAUSE [7/9] button to start
playback.
8 Pausing playback
Press the PLAY/PAUSE [7/9] or STOP [8] button
to pause playback.
NOTE
Press the PLAY/PAUSE [7/9] button again to
resume playback.
8 Stopping playback
Press the STOP [8] button when paused to return to
the beginning of the file.
8 Searching backward and forward
When the Home Screen is open and a track is playing
back or stopped, press and hold the . or /
button to search forward or backward.
Release the button to stop again or resume playback.
8 Selecting files (skipping)
When stopped or playing back, press the . button
to skip to the previous file, or press the / button to
skip to the next file.
8 Listening with the built-in speaker
Set the (speaker) switch to ON.
8 Listening with headphones
Connect headphones to the (headphone) jack.
NOTE
When headphones are connected, the built-in
speaker will not output sound even when the
(speaker) switch is set to ON.
8 Adjusting the volume
LEVEL control to adjust the volume
Use the
output from the built-in speaker and headphones.
10
TASCAM DR-100MKIII

Deleting files

Follow these steps to delete a recorded audio file.
Open the Function Screen
1.
Press the Fn button.
Select the delete function.
2.
Use the wheel to select FILE DELETE, and press
the ENTER/MARK button.
Execute deletion.
3.
Use the wheel to select YES, and press the ENTER/
MARK button to delete the file and return to the
Home Screen.
To cancel, select NO, and press the ENTER/MARK
button to return to the FUNCTION Screen.
CAUTION
Be aware that file deletion cannot be undone.

Connecting with a computer

You can transfer audio files on the SD card in the unit
to a computer, as well as transfer audio files from the
computer to the unit.
8 Connecting with a computer using
USB
Connect the USB cable.
1.
If the unit is off (in standby), turn it on.
Activate the connection
2.
Select the SYSTEM screen USB STORAGE item, and
press the ENTER/MARK button.
MENU w SYSTEM w USB STORAGE
Use the wheel to select YES, and press
the ENTER/MARK button to activate the
connection.
To cancel, select NO, and press the ENTER/
MARK button.
This unit appears on the computer as an external
3.
drive named "DR-100MKIII" (if the card has been
formatted by this unit).
8 Exchanging files with a computer
After following the instructions in the previous section,
click the "DR-100MKIII" drive on the computer screen to
show the "MUSIC" and "UTILITY" folders.
To transfer files to the computer, open the "MUSIC"
folder and drag and drop the desired files to destina-
tions of your choice.
To transfer files from the computer, drag and drop the
desired audio files on the computer to the "MUSIC"
folder.
8 Disconnecting from a computer
Use the proper procedures on the computer to
unmount this unit. Then, press the ENTER/MARK
button on the unit to return to the Home Screen.
See the computer's operation manual for instructions
about how to unmount an external volume.