Troubleshooting; Specifications; General; Inputs And Outputs - Tascam DR 100 MK III Mode D'emploi

Troubleshooting

If you are having trouble with the operation of this unit, please check the
following before seeking repair. If these measures do not solve the problem,
please contact the store where you bought the unit or TEAC customer support
(see back page).
8 The unit will not turn on.
•
Confirm that the built-in battery has enough charge or that the replaceable
batteries are installed correctly.
•
Confirm that the TASCAM PS-P520E AC adapter (sold separately) power
plug and the USB connector are securely connected. The unit might not
operate properly through a USB hub.
•
Confirm that the HOLD switch is set to OFF.
8 The unit turns off automatically.
•
Confirm that the automatic power saving function is disabled.
i Since this unit complies with the European Standby Power Regulations
(ErP), the automatic power saving function operates regardless of
whether the unit is being powered by an AC adapter or batteries. If you
do not want to use the automatic power saving function, set it to OFF.
(The factory default setting is 30min.)
8 The CHG indicator alternately lights orange and
green.
•
Proper charging might not be possible in a location that is too hot or too
cold. Charging is possible when the temperature is between 0−30°C.
8 The remaining charge of the built-in battery is not
shown accurately
•
The remaining charge of the built-in battery might not be shown accurately
when the unit is purchased. Discharge and charge the battery completely
once to enable the unit to relearn the remaining battery charge and show
it accurately.
8 The unit does not function.
•
Confirm that the HOLD switch is set to OFF.
•
The unit will not function when in USB storage mode.
•
If operation becomes abnormal, press and hold the
for at least 10 seconds while holding down the STOP [8] button. This will
force the unit to turn off.
8 The SD card is not recognized.
•
Confirm that the SD card is inserted completely.
8 No sound is output.
•
Confirm the unit headphone/speaker output level.
•
Check the monitoring system connections and volume level.
•
No sound is output from the speaker in the following conditions.
i The (speaker) switch is set to OFF
i The unit is recording or in recording standby
i Headphones are connected
16
TASCAM DR-100MKIII
8 Recording is not possible.
•
Confirm that the the SD card has enough open space.
•
Recording becomes impossible when the total number of files reaches
5000.
8 The input sound is extremely quiet or loud.
•
Check input level settings.
•
Check the output levels of connected external equipment.
8 The output sounds unnatural.
•
Check the playback speed (VSA playback function).
•
Confirm that the level control function is not on.
8 I cannot erase a file.
•
A protected (read only) file cannot be erased.
8 This unit's files do not appear on the computer.
•
Confirm that the unit is properly connected to the computer using its USB
port. The unit might not operate properly if connected through a USB hub.
•
Confirm that the unit is in USB storage mode.
8 The wrong language was set accidentally.
•
After pressing the
(power) button while pressing and holding the MENU button.
The language selection menu will appear, and you will be able to select the
language.
(power) button
(power) button to turn the unit off, press the

Specifications

General

8 Recording media
SD card (64 MB−2 GB)
SDHC card (4 GB−32 GB)
SDXC card (48 GB−128GB)
8 Recording/playback formats
WAV (BWF): 44.1/48/88.2/96/176.4/192kHz, 16/24-bit
MP3: 44.1/48kHz, 128/192/256/320kbps
8 Number of channels
2 channels (stereo)

Inputs and outputs

8 MIC/LINE IN jacks (XLR support phantom power)
Connectors: XLR-3-31, 6.3mm (1/4") standard TRS jacks
8 EXT IN jack (can provide plug-in power)
Connector: 3.5mm (1/8") stereo mini jack
8 DIGITAL IN connector
Connector: 3.5mm (1/8") TRS jack
8 LINE OUT jack
Connector: 3.5mm (1/8") stereo mini jack
(headphone) jack
8
Connector: 3.5mm (1/8") stereo mini jack
8 Built-in speaker
0.4W (mono)
8 USB port
Connector type: Micro-B
Format: USB 2.0 HIGH SPEED mass storage class
8 REMOTE jack
Connector: 2.5mm (3/32") TRS jack