Preparing The Machine - Canon PIXMA MP210 Guide De Démarrage Rapide

Preparing the Machine

Be sure to read your setup sheet first for setting up your machine and getting it ready for use.
The diagrams and computer screens in your setup sheet refer to the MP220 series.The operations
are exactly the same as those for the MP210 series, unless otherwise described.
Unpack the machine
Please confirm the included items against the illustration printed on the lid of the packing box.
Important
A USB cable is necessary to connect the machine with your computer.
1
Turn on the machine.
Caution
Be sure to remove the tapes and protective material before you turn on the machine.
Note
The tape or the protective material position is subject to change.
2
Prepare the FINE Cartridges.
Caution
Do not touch internal parts other than the FINE Cartridge Holder.
Do not drop or shake FINE Cartridges as this may cause the ink to leak out and stain your
clothes and hands.
Important
If the Scanning Unit (Printer Cover) is left open for more than 10 minutes, the FINE Cartridge
Holder moves to the right side. Close and reopen the Scanning Unit (Printer Cover) to return the
holder to the left.
Do not touch the electrical contacts or Print Head Nozzles on a FINE Cartridge. The machine
may not print out properly if you touch it.
Do not reattach the protective tape once it has been removed.
Handle the removed protective tape carefully to avoid getting your hands dirty or staining
surrounding work area.
4 Preparing the Machine