NEC MultiSync LCD175VX+ Manuel De L'utilisateur page 9

Connecting a Flexible Arm
This LCD monitor is designed for use with a flexible arm. Please use the attached
screws (4pcs) as shown in the picture when installing.
To meet the safety requirements, the monitor must be mounted to an arm which
guaranties the necessary stability under consideration of the weight of the monitor.
The LCD monitor should only be used with an approved arm (e.g. GS mark).
Specifications
4-SCREWS (M4)
MAX depth: 7.0 mm
If using other screws,
check depth of holes.
Quick Start
Replace screws
00 mm
7
- continued
Thickness of Bracket
(Arm) 2.0~3.2 mm
00 mm
Weight of LCD assembly:
TBDkg - LCD75VX+(MAX)
3.8kg - LCD75VXM+(MAX)
TBDkg - LCD95VX+(MAX)
Tighten all
screws.