Removing Jammed Staples; Optional Accessories - Makita DST221 Manuel D'instruction

Agrafeuse sans fil
Masquer les pouces Voir aussi pour DST221:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Checking remaining staples
► 1. Sight window
CAUTION:
Do not operate the tool without staples. It short-
ens the service life of the tool.
There is a convenient sight window on the right side of
the tool (when viewing the tool from the front). Use this
sight window to check if there are staples in the maga-
zine. When staples are not visible through the window,
load staples into the magazine.

Removing jammed staples

WARNING:
Always make sure that the trigger are released
and the battery cartridge is removed before
removing jammed staples .
Remove the battery cartridge from the stapler.
► 1. Sub magazine 2. Locking lever
Press the locking lever on the rear of the sub magazine
and slide the sub magazine backward.
Take out stuck staples that remain inside the opening
that staples are fired from as it appears.
MAINTENANCE
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
1
Centers, always using Makita replacement parts.
OPTIONAL
ACCESSORIES
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
NOTE:
1
MAKITA LIMITED WARRANTY
Please refer to the annexed warranty sheet for the
most current warranty terms applicable to this product.
2
If annexed warranty sheet is not available, refer to the
warranty details set forth at below website for your
respective country.
United States of America: www.makitatools.com
Canada: www.makita.ca
Other countries: www.makita.com
8 ENGLISH
CAUTION:
Always be sure that the tool is switched off and
the battery cartridge is removed before attempt-
ing to perform inspection or maintenance.
Never use gasoline, benzine, thinner, alcohol
or the like. Discoloration, deformation or cracks
may result.
CAUTION:
These accessories or attachments are recom-
mended for use with your Makita tool specified
in this manual. The use of any other accessories
or attachments might present a risk of injury to
persons. Only use accessory or attachment for
its stated purpose.
Staples
Makita genuine battery and charger
Safety goggles
Some items in the list may be included in the
tool package as standard accessories. They
may differ from country to country.

Publicité

Table des Matières
loading

Table des Matières