Loading Staples - Makita DST221 Manuel D'instruction

Loading staples

Remove the battery cartridge.
Press the locking lever on the rear of the sub magazine
and slide the sub magazine backward.
► 1. Sub magazine 2. Locking lever
Load staples into the main magazine with their feet
facing up. Slide the sub-magazine forward.
► 1. Staples 2. Main magazine
To secure the sub magazine in place, hook the locking
lever on the rear of the sub-magazine.
CAUTION:
• With the magazine loaded, if the tool is held
downward and the sub-magazine is opened,
the staples can fall out and present a danger
to anyone or anything below. Keep this in mind
especially when working in high locations.
Unloading staples
CAUTION:
• When removing staples, make sure that your
fingers are not placed on the trigger or the lever
and the battery cartridge is removed from the
stapler. Misfiring may cause personal injuries
and property damage.
Remove the battery cartridge.
Press the locking lever and slide the magazine back.
1
2
1
2
► 1. Sub magazine 2. Locking lever
Take out staples from the magazine slit.
► 1. Sub magazine 2. Locking lever
Hook
CAUTION:
• Always make sure that your fingers are not
placed on the trigger or the lever and the battery
cartridge is removed before using the hook.
► 1. Groove 2. Hook 3. Screw
CAUTION:
• Do not hang the hook from the waist belt.
Dropping the stapler, which is caused by the
hook accidentally coming out of place, may
cause misfiring and personal injuries.
6 ENGLISH
2
1
2
1
2
3
1