4. Mounting the protective cover
• Insert the safety pin (1) in the bottom die and
push in the protective cover (2) until you can feel it
snap in.
!
The power supply to the EC 65 will be
cut off if the protective cover is not fitted
or is not fitted properly.
5. Connecting / switching on the EC 65
Connect the foot switch (1) to the foot switch
connection.
Connect the mains plug (2) on the mains
connection and the shock-proof plug (3) to the
mains socket.
Switch on the EC 65 at the mains switch (4)
(press I).
lights up (5).
12/09
START-UP
Figure 5
Figure 6
Connecting / switching on the EC 65
EC 65
Mounting the protective cover
9