Authorised Operators; Guarantee - GLW EC 65 Mode D'emploi

Authorised operators

Only authorised and instructed operators may be allowed to work on the EC 65.
The operator is responsible for third persons within the working area.
The owner must
 give the operator access to the operating manual and
 make sure that the operator has read and understood it.

Guarantee

Our "General Terms of Sale and Delivery" apply basically. These will be available to the owner at
the latest upon signing the contract.
Guarantee and liability claims are excluded in the case of personal injury and property damage in
the event of violation of the following points:
 use of the EC 65 for a purpose for which it was not intended
 improper work places
 improper use and use above and beyond that described in the operating manual
 unauthorised constructional modifications to the EC 65
 continued operation of the EC 65 after faults have been detected
 continued operation of the EC 65 beyond 500,000 crimping processes. The device must be
serviced by the manufacturer after 500,000 crimping processes. A LED
panel signals when the device is due for servicing.
 improperly performed die assembly/repairs.
!
Only use original dies and spares.
12/09
SAFETY EC 65
on the control
3