Declaration Of Conformity; Receipt, Storage And Handling - Lorentz PS2-150 Manuel D'installation Et De Fonctionnement

6

Declaration of Conformity

1 Declaration of Conformity
We, BERNT LORENTZ GmbH & Co. KG Germany, declare
under our sole responsibility that the products
PS2-150 Boost, PS2-150 C, PS2-150 HR, PS2-200 HR,
PS2-600 HR, PS2-600 C, PS2-600 CS-F, PS2-600 Pool
CS-17-1, PS2-1800 HR, PS2-1800 C, PS2-1800 CS-F,
PS2-1800 Pool CS-37-1, PS2-4000 HR, PS2-4000 C,
PS2-4000 CS-F
to which the declaration relates, are in conformity with the
Council Directives on the approximation of the laws of the
EC Member States relating to:
ƒ Machinery (2006/42/EC)
ƒ Electromagnetic compatibility (2004/108/EC)
ƒ Electrical equipment designed for use with certain
voltage limits (2006/95/EC)
BERNT LORENTZ GmbH & Co. KG
Siebenstücken 24
24558 Henstedt-Ulzburg
Germany
1 January 2016
Bernt Lorentz, CEO

2 Receipt, Storage and Handling

Check upon receipt that the packaging is undamaged and
complete. If any abnormity is found, contact your supplier.
LORENTZ pumps are supplied from the factory in proper
packing in which they should remain until they are to be
installed at the site. Handle the pump with care and avoid
unnecessary impacts and shocks.
Prolonged intermediate storage in an environment of high
humidity and fluctuating temperatures must be avoided.
Moisture condensation may damage metal parts. Non-com-
pliance can void the warranty. It is recommended storing
the parts in a closed and dry room.
The motor, the pump end and controller can be stored (not
used) in the range of –20 °C to +65 °C (–4 °F to +149 °F).
The components should not be exposed to direct sunlight.