Connecting The Headset System; Step 1-: Connecting A 7.1Ch Sound Device - Sony DR-GA500 Mode D'emploi

 Connection

Connecting the Headset system

Step 1-: Connecting a 7.1ch Sound Device
1
Connect the processor to the
sound device as illustrated below.
Connecting jacks of the sound
device*
MIC IN
Connect to MIC IN jack
L/R OUT
Connect to L/R OUT jack
Surround L/R OUT
Connect to SL/SR OUT jack
Center/Subwoofer OUT
Connect to C/SW OUT jack
Surround back L/R OUT
Connect to SBL/SBR OUT jack
* The jack name varies depending on the sound
device.
2
Slide the INPUT switch to "7.1ch."
3
Set the 7.1ch speaker mode in the computer.
For details on operation of your computer/sound device, refer to the operating instructions
for it.
Do not connect the USB cable with multi-channel cable at the same time when you connect
the processor to the computer. The computer sound setting may be switched to an
unintended device.
8
US
Connection
Cable
plug
names
MIC

L / R

SL / SR

C / SW

 SBL / SBR
Rear panel of processor
Front panel of
processor
Multi-channel cable
(supplied)