Precautions - Sony DR-GA500 Mode D'emploi

Precautions

On safety
 Do not drop, hit, or otherwise expose the
processor or headset to strong shock of any kind.
This could damage it.
 Do not disassemble or attempt to open any parts
of the system.
 The earpads and head cushion may deteriorate
due to long-term storage or use.
On placement
 Do not place the system in any of the following
locations.
– Location exposed to direct sunlight, near a
heater, or other extremely high temperature
location
– Dusty location
– On an unsteady or inclined surface
– Location exposed to large amounts of
vibration
– Bathroom or other high-humidity locations
On AC adaptor
 Be sure to use the supplied AC adaptor. Using
AC adaptors with different plug polarity or other
characteristics can cause product failure.
Unified polarity plug
 Be sure to always use the supplied AC adaptor.
Even AC adaptors having the same voltage and
plug polarity can damage this product due to the
current capacity or other factors.
 If you are not going to use the system for a long
time, unplug the AC adaptor.

US
Additional Information
On headphones
Act considerately
When the volume is too high, the sound leaks
outside the headphones. Be careful not to increase
the volume so high that it bothers people around
you.
There is a tendency to increase the volume when
using in noisy places. However, for reasons of
safety, it is advised to keep the volume at a level
whereby you can still hear sounds around you.
On cleaning
Use a soft cloth slightly moistened with mild
detergent solution. Do not use solvents such as
thinner, benzene or alcohol as these may damage
the surface.
If the product breaks
 If the product breaks, or if a foreign object gets
inside the unit, immediately turn off the power
and consult your nearest Sony dealer.
 When taking the system to a Sony dealer, be sure
to take both the headphones and processor.