Favorite Channel; Move Channel; Lock Channel; Rename Channel - Zodiac DZR-3000FTA Manuel D'utilisation

ENGLISH
Pressing the MENU key on the RCU will display the command menu. TV channel manager has 3 commands as
shown below;
1. Rename Favorite group
2. Rename
3. Sort

6.2 Favorite Channel

When you select channel manager, default favorite list will be shown on screen as Favorite 1.
Select you favorite channel and then press OK key. Then will be marked next to your selected channel
name. If you want to remove the channel name from the favorite channel list, press OK key once again, then the
mark will disappear. After the selection for favorite channels press EXIT key twice to save data and press FAV
key repeatedly to see if each of the favorite groups are properly selected.
How to make a favorite group
1. When you enter channel manager, the default favorite group will be shown once on the screen as Favorite 1.
2. If you press favorite key (Green color key) on the RCU, a new favorite group will be created as Favorite 2.
How to edit the name of a Favorite group
1. In the favorite mode, press MENU key on the RCU then the command box will be displayed on the screen.
2. Select "Rename Favorite group" in the command box.
3. You can edit the name by using the keypad.

6.3 Move Channel

In the TV channel manager page, press Move key (Yellow color key) on the RCU. Select a channel by pressing
OK key and move the cursor to the location where you want to move the selected channel and press OK key.
Then, you will find that the selected channel has moved to the desired location and the channel number has
changed accordingly.

6.4 Lock Channel

In the TV channel manager page, press Lock key (gray color key) on the RCU. This Lock command allows you
to lock the channel. First, select the channel which you want to lock and press OK key. Then this will be
marked beside the selected channel name.
Note: To perform this function, you should set up the Parental Lock in advance.

6.5 Rename Channel

In the Main Page, press MENU key on the RCU and then select Rename on the command menu. This Rename
command allows you to rename the channel. First, select the channel to be renamed and press OK key, then a
keypad dialog box will be displayed. Enter the desired name.

6.6 Delete Channel

In the Channel manager, you can enter Delete CH mode, if you press Delete key (Red color key) on the RCU.
Then, if you press Delete key (Red color key) repeatedly, the mode will cycle through Delete TP -> Delete
Satellite Delete All -> Delete CH. This Delete command allows you to delete the channel permanently. First,
select the channels which you want to delete; the selected channel number will be marked to "X". If you cancel
the selection, press OK key again, then the marked number will be back. If you decide to delete, press EXIT key
and then press OK to delete. Check whether the channel number is deleted on channel list.
Warning: The deleted channel cannot be recovered unless you search again.
E - 8