General Viewing Function; Channel Manager - Zodiac DZR-3000FTA Manuel D'utilisation

ENGLISH
4.7 Factory Default
If you want to bring SMART 120S back to the factory default condition, select Factory Default and press the OK
key.
Then a warning message will be displayed. To confirm, select OK.
Warning: On selecting factory default you will lose all of data and information, which has previously installed.

5. General Viewing Function

The following describes the basic functions of your DZR while watching satellite TV or listening to satellite radio.
While watching, the current channel information will be shown on the button of the screen if you press the INFO
button on the RCU.
5.1 Select Channel
If you want to select channel, use CH key on the front panel or CH key on the RCU or numeric keys. In addition
to the above normal function, DZR provides more convenient channel change function.
While watching, press OK key on the RCU. A channel list will be displayed on the right side of the screen. If you
press EXIT key, the channel list will disappear. To select a channel, go up or down this channel list and place the
cursor on a desired channel. Then, press OK key to watch the selected channel.
5.2 Previous Channel Recall
Press RECALL key on the RCU to the previous channel you watched.
5.3 TV&Radio Mode
While viewing a TV channel, press TV/RADIO key on the RCU to toggle between TV and Radio modes.
5.4 SAT&TV Mode
The SAT/TV key on the RCU lets you change the mode from satellite to TV or VCR.
Press once to move to the TV mode.
Press twice to move to VCR mode.
Press three times to move back to satellite mode.
5.5 Channel Information
Every time you change channels, you will receive program information for a few seconds.
While watching the channel you can see the current channel information at anytime by pressing INFO key on
the RCU.
5.6 Favorite List
To create a favorite group list, press FAV key on the RCU. You can access the next favorite group when you
press FAV key again.

6. Channel Manager

The DZR provides one of the most powerful channel managing functions in the world. This function not only
allows you to watch channels but also do a lot of interesting and useful things.
6.1 Channel Manager
Channel manager consists of TV channel and Radio channel.
Note: Since the usage of Radio Channel is same as that of TV channel, in this manual only TV Channel
manager is explained.
On the left side of the TV channel menu, you can see the channel list. On the right side, you can watch the
current channel in small Picture in Graphic (PIG) mode. You can also see channel information under the PIG
screen. When you move the cursor from one channel to another, the PIG will change accordingly.
You can use those color keys on the RCU as below.
E - 7