Rear Panel; Remote Control Unit (Rcu) - Zodiac DZR-3000FTA Manuel D'utilisation

ENGLISH

2. Rear panel

1. SAT ANT IN: Connects the satellite antenna cable.
2. SAT ANT OUT: Use it to connect to other STB.
3. RS-232: Upgrades the STB Program & Software.
4. VCR: Connects your VCR via a SCART cable to this receiver.
5. TV: Connects your TV via SCART cable to this receiver.
6. S/P DIF: Output for connection to a digital amplifier.
7. Power on/off
8. 90-260V AC (Auto-selectable), 50/60Hz. Power supplier.

2.1 Remote Control Unit (RCU)

1. POWER - Switches the STB between Operation and standby mode.
2. INFO - Displays the programme information box on the screen.
3. 0-9 (Numeric Keys) - Selects the TV or Radio service channels and individual Menu options.
4. AUDIO - Set the output direction for speaker.
5. TV / RADIO - Selects the TV /Radio mode.
6. EPG - Displays the EPG (Electonic Programme Guide) on screen only when available.
7. MUTE - Enables /Disables the Audio.
8. EXIT - Returns to the previous menu and the screen.
9. MENU - Displays the Menu on screen or returns to previous menu from submenu.
10. OK - Confirms the choices and selection with highlight menu item.
11. CH p/q - Change channels in viewing mode and moves cursor up/down in menu mode.
12. VOL t/u - Changes the volume level in viewing mode and setting in menu mode.
13. PAUSE - To still picture in current channel.
14. SAT/TV - Changes the terrestrial TV and Satellite mode.
15. RECALL - Moves to the previous channel.
16. FAV p/q - To move up or down favorite channels in the favorite list.
17. SAT - To select the Satellite.
18. TEXT - Shows the teletext contteletext is transmitted.
19. FAV - To shows favorite channels list.
20. UHF - Display RF information.
1.
E - 3