Comprendre Le Dap - Vornado AC500 Manuel D'utilisation

Masquer les pouces

Table des Matières

How To Use

Automatic Dust Sensing Mode

This feature monitors the air quality of the room to detect the

presence of particles, then adjusts the fan speed to improve

air quality to optimum conditions. Press the Automatic Dust

Sensing Mode Button to engage this feature. The screen will

display the animated Automatic Dust Sensing icon (shown

above), to indicate when this feature is active. The Dust Sen-

sor will continuously monitor the amount of airborne particles

in the environment and adjust the fan speed between Low,

Medium and High as needed to maintain optimum air quality.

The Quick Clean speed is not utilized when Automatic Dust

Sensing Mode is enabled. Please note that Automatic Dust

Sensing Mode is overridden when Sleep Mode is engaged to

ensure the unit is providing a consistent, low noise level during

nighttime sleep.

English

When To Use:

This feature allows the unit to reduce energy usage when

fewer airborne contaminants are present in the room. Because

active people and pets tend to stir up airborne particles, the

unit will tend to increase speed during peak periods of activity

in the room until lower readings are obtained. This feature is

ideal for rooms where activity ﬂ uctuates greatly based on the

time of day.

Note: The Dust Sensor will need to be cleaned periodically.

Please refer to CLEANING AND MAINTENANCE on page 17.

Sleep Mode Setting

This feature senses no light or low light conditions, and auto-

matically adjusts the unit to low speed. Press the Sleep Mode

button to engage this feature. The Sleep Mode icon (shown

above) will display. Ideal for use in bedrooms. Higher and more

powerful speeds may be used throughout the day with lower

speeds and minimal noise being preferable at night.

Note: When in low light or no light, with sleep mode selected,

the unit will only operate at low speed. This will override Auto-

matic Dust Sensing Mode and high-speed settings. In regular

light, the unit will operate at the previous setting.

Véritable Filtration HEPA

Qu'est-ce que le DAP?

DAP signiﬁ e « débit d'air puriﬁ é ». Il s'agit du volume d'air ﬁ ltré

que fournit un puriﬁ cateur d'air. L'indice DAP montre le degré

d'efﬁ cacité d'un puriﬁ cateur d'air quand il s'agit de capter les

petites particules. Un indice DAP plus élevé indique une meil-

leure performance dans toutes les grandeurs de pièces.

Remarque: Il est suggéré d'utiliser cet épurateur d'air dans

une pièce fermée individuelle dont la superﬁ cie ne dépasse

pas 335 sq.ft. carrés.

Les épurateurs d'air portables sont beaucoup plus efﬁ caces si

toutes les portes et les fenêtres de la pièce sont fermées.

Testé selon la norme nationale ANSI/AHAM AC-1