Lea LE24250DP Mode D'emploi page 34

Check that the blade guard is not damaged or
distorted. Replace the blade guard if it is bent or
damaged.
Clean the air filter. Replace if necessary.
Check that nuts and screws are tight.
Check that there are no fuel leaks from the engine,
tank or fuel lines.
Check the starter and starter cord.
Clean the outside of the spark plug. Remove it and
check the electrode gap. Adjust the gap to 0,6-0,7 mm
or replace the spark plug. Check that the spark plug is
fitted with a spark plug cap.
Clean the machine's cooling system.
Clean the outside of the carburetor and the space
around it.
Check the flange, cap and nut are assembled
correctly and tightened
Clean the fuel tank.
Check all cables and connections.
Check the clutch, clutch springs and the clutch drum
for wear. Replace if necessary by an authorized
service workshop.
Replace the spark plug. Check that the spark plug is
fitted with a spark plug cap.
To reduce the fire hazard, clean dirt, leaves and
surplus lubricant, etc from the muffler and engine.
MAINTENANCE should be carried out at
REGULAR INTERVALS in each of the
indicated months or after a certain number of
hours of operation (whichever comes first). (1)
Air filter
Valve-clearance
Fuel tank and filter
Grease inside gear box
Blade
Fuel feed line
Before use
every time
Clean
Check – Clean
Clean
Filling
Check (replace if
X
necessary)
Check (replace if
Every three years (2)
necessary)
30
X
X
X
X
X
X
X
X
X
Every three
Monthly or
months or
after 25
after 50
hours
hours
X(1)
X(1)
X
X
X
X
X
X
Every six
months or
after 100
hours
X(2)
X(2)