Lea LE24250DP Mode D'emploi page 33

Your machine is equipped with tap automatics with double string. it means that both
strings will be extended when the cutting head touches the ground and the machines runs
on full grass.
Hold the machine in operation over the grass area and slightly touch the ground with
cutting head several times. In this way you extend the string
The knife in the protection guard cuts the string to required length.
Stopping the engine
1. Reduce the engine speed and let it run with no load for a few minutes.
2. Switch off the engine by moving the engine switch to the stop position.
The accessory may cause an accident if it continues to turn after the engine has stopped or
after the engine switch has been released. When the unit has stopped, check carefully that the
accessory has stopped turning before putting the unit down.
MAINTENANCE
Good maintenance is essential for safe, economical and trouble-free operation. It will also help
reduce air pollution.
The purpose of the maintenance and adjustment schedule is to keep the machine in
the best operating condition.
Turn off the engine before performing any maintenance. If the engine must be run, make
sure the area is well ventilated. The exhaust contains poisonous carbon monoxide gas
Please always select recommended accessories. The accessories which have not equivalent
quality may damage the machine.
Please never use non approved components and remove the safety devices after or
during maintenance.
Maintenance
Clean the outside of the machine.
Make sure the throttle trigger lock and the throttle
function correctly from a safety point of view.
Check that the engine switch works correctly.
Check that the blades do not move when the engine is
idling or when the choke is in the start throttle position.
Check that the blades are undamaged and show no
signs of cracking or other damage. Replace the
blades if necessary.
Daily
maintenance maintenance
X
X
X
X
X
29
Weekly Monthly
maintenance