Brush Roller - Tineco FLOOR ONE S3 Série Mode D'emploi

Brush Roller

Remove the brush roller by grabbing the brush
roller tab and pulling upward.
Remove hair and debris from the brush roller
chamber and the opening with a tissue or a
damp cloth.
Note:
A spare brush roller is provided with your appliance for convenient replacement.
Remove the brush roller tab. Using the cleaning
tool, remove the hair and debris wrapped around
the roller and rinse with water. Replace the brush
roller back into the accessory holder, and allow it
to dry completely before reinstalling.
Replace the brush roller by inserting the brush
roller end into the right side of the holder,
then lock the pull tab into place by pressing
downward.
19