Tineco FLOOR ONE S3 Série Mode D'emploi page 19

Dirty Water Tank
• When dirty water reaches the Max line, the appliance will stop working and show a reminder on the
display and play a voice prompt.
• Pull up the tank lid to empty the DWT. Use the 3-in-1 cleaning tool to remove remaining debris.
Rinse the inside of the DWT and place back into the appliance.
Filter & Floater
If the filter and the floater have been blocked, rinse with water.
Remove the filter from the tank lid, remove the floater, and rinse both parts with water.
HEPA
Grasp recessed area on each side of the HEPA and pull upward. Rinse under running water and must
be completely dry before recombining with the lid of the DWT.
*A spare HEPA is provided with your appliance for convenient replacement.
17