RIDGID R4041 Manuel D'utilisation page 13

ASSEMBLY
INSTALLING WATER FILTER AND WATER
PUMP
See Figures 10 - 11.
The water pump recirculates water from the tray to the cut-
ting wheel.
 Locate filter slots and pump well in water tray. Pump well
is marked "pump well."
 Slide filter into filter slots, as shown.
 Locate the "Max/Min" water flow selector on the pump.
For best performance, start with the flow to "Max" to
control the flow of water over the wheel.
NOTE: Water flow can be adjusted during use by remov-
ing the filter, reaching into water well and turning flow
selector on pump. Reinsert filter.
 Place water pump into pump well.
WATER
FILTER
PUMP WELL
FILTER SLOTS
WATER
FLOW
SELECTOR
WATER
HOSE
NOTCH
POWER
CORD
NOTCH
POWER CORD
13 — English
WATER TRAY
Fig. 10
MAXIMUM
FLOW
WATER PUMP
PUMP
WELL
Fig. 11