Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
10
www.electrolux.com
Immediately touch a desired heat setting.
After 3 seconds
To deactivate the function: change the
heat setting.
4.7 Power function
This function makes more power
available to the induction cooking zones.
The function can be activated for the
induction cooking zone only for a limited
period of time. After this time the
induction cooking zone automatically
sets back to the highest heat setting.
Refer to "Technical
information" chapter.
To activate the function for a cooking
zone: touch
To deactivate the function: change the
heat setting.
4.8 Timer
Count Down Timer
You can use this function to set how long
the cooking zone should operate for a
single cooking session.
First set the heat setting for the cooking
zone then set the function.
To set the cooking zone: touch
again and again until the indicator of a
necessary cooking zone comes on.
To activate the function: touch
the timer to set the time (00 - 99
minutes). When the indicator of the
cooking zone starts to flash slowly the
time counts down.
To see the remaining time: set the
cooking zone with
the cooking zone starts to flash quickly.
The display shows the remaining time.
To change the time: set the cooking
zone with
To deactivate the function: set the
cooking zone with
remaining time counts back to 00. The
indicator of the cooking zone goes out.
comes on.
.
comes on.
. The indicator of
. Touch
or
.
and touch
When the time comes to an
end, the sound operates and
00 flashes. The cooking
zone deactivates.
To stop the sound: touch
CountUp Timer (The count up timer)
You can use this function to monitor how
long the cooking zone operates.
To set the cooking zone: touch
again and again until the indicator of a
necessary cooking zone comes on.
To activate the function: touch
the timer.
indicator of the cooking zone starts to
flash slowly the time counts up. The
display switches between
counted time (minutes).
To see how long the cooking zone
operates: set the cooking zone with
The indicator of the cooking zone starts
to flash quickly. The display shows how
long the zone operates.
To deactivate the function: set the
cooking zone with
. The indicator of the cooking zone
goes out.
Minute Minder
You can use this function as a Minute
Minder when the hob is activated and
the cooking zones do not operate. The
of
heat setting display shows
To activate the function: touch
Touch
time. When the time comes to an end,
the sound operates and 00 flashes.
To stop the sound: touch
The function has no effect
on the operation of the
cooking zones.
4.9 STOP+GO
. The
This function sets all cooking zones that
operate to the lowest heat setting.
comes on. When the
and touch
or
of the timer to set the
.
of
and
.
or
.
.
.
Publicité
Chapitres
Table des Matières
