Vasco BASIC Manuel D'utilisation Et D'installation page 71

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 22
OVERVIEW OF THE PROGRAMS
Comfort
Your device's default setting is non-stop Comfort for 7 days a week.
- Comfort: the controller will operate in Comfort mode, 24 hours a day, as regards each day selected.
- Eco: the controller will operate 24 hours a day in Eco mode.
Note: You can set the temperature-lowering parameters, installer settings 1.1
Heat room at different moments every day: Manual change between comfort & eco temperature. The radiator remains
set at the last selected mode (comfort / eco).
WEEKLY PROGRAMS: P1/P2/P3
Heat room at fixed moments every day: Automatic change between comfort & eco temperature.
- P1: the controller will operate in Comfort mode for 1 time block eg: from 06:00 to 22:00 (and in Eco mode from
22:00 to 06:00).
Set comfort temperature 20°
Eco temperature 16,5°
- P2: the controller will operate in Comfort mode for 2 time blocks eg: from 06:00 to 10:00 and from 16:00 to 22:00
(and in Eco mode from 10:00 to 16:00 and from 22:00 to 06:00).
Set comfort temperature 20°
Eco temperature 16,5°
- P3: the controller will operate in Comfort mode for 3 time blocks eg: from 06:00 to 10:00, from 12:00 to 14:00 and
from 18:00 to 22:00 (and in Eco mode from 22:00 to 06:00, from 10:00 to 12:00 and from 14:00 to 18:00).
Set comfort temperature 20°
Eco temperature 16,5°
Note: If the standard times of P1, P2 and P3 do not suit you, you can change them, but then this time applies to
all days of the week on which P1, P2 or P3 is set.
For P2 & P3 there must always be at least 1 hour between the time periods.
Eco
P1
0h
2h
4h
0h
2h
4h
0h
2h
4h
P2
6h
8h
10h
12h
14h
6h
8h
10h
12h
14h
6h
8h
10h
12h
14h
P3
16h
18h
20h
22h
24h
16h
18h
20h
22h
24h
16h
18h
20h
22h
24h
09
EN

Publicité

Table des Matières
loading

Produits Connexes pour Vasco BASIC

Ce manuel est également adapté pour:

Rf

Table des Matières