Operating Modes; Setting The Comfort Temperature - Vasco Basic Manuel D'utilisation Et D'installation

OPERATING MODES

Press the button to select the required mode.
Overview operating modes:
Auto
• Auto mode (3 situations)
3 situations: P1/P2/PE see p9
Week program has been set
1
If a week program has been set, the radiator will automatically switch between Comfort and Eco mode.
In the event of a power failure of more than 3 hours, the day and time must be reset, the week program
BASIC
remains permanently in memory.
Programming by pilot wire (only for France)
2
No week program has been set
3
If the week program is not set, the radiator works permanently in Comfort mode.
• Comfort mode
The device will operate 24 hours a day to achieve
the temperature which has been set (e.g. 19°C).
The Comfort mode temperature level can be set by the
user.
• Eco mode
Eco, which means the Comfort Mode temperature
minus 3.5°C. This enables you to lower the temperature
without having to reset the Comfort Mode temperature.
Select this mode for shortterm absences (between 2
and 24h ) and during the night.
Frost protection mode
•
This mode enables you to protect your home
against the effects of cold weather (frozen pipes, etc.),
by maintaining a minimum temperature of 7°C in it at all
times. Select this mode when you will be away from your
home for a long time (more than 5 days).

SETTING THE COMFORT TEMPERATURE

You can set the Comfort temperature in Auto and
Comfort Mode. It is preset to 19°C.
Using and you can adjust the temperature
from 7°C to 30°C by intervals of 0.5° C.
08
Comfort Eco Frost Protection
3