KitchenAid 5K45 Guide D'utilisation page 2

This is a quick guide for using the glass bowl:
The glass bowl is designed exclusively for use with the tilt-head stand mixers
(models 5K45, 5KSM45 and 5KSM150PS/5KSM156). For complete information on the
use of these stand mixers, please read the Instructions and Recipes guide that came with
your stand mixer.
GUIDE TO ATTACHING GLASS BOWL
This glass bowl is designed to fit several
different tilt-head stand mixers. Follow
these instructions to attach the glass bowl
to your stand mixer.
To Attach Glass Bowl to Mixer
1. Turn speed control to "0" (OFF).
2. Unplug stand mixer.
3. Tilt motor head back.
4. Place bowl on bowl clamping plate.
5. Turn bowl gently in the clockwise
direction.
To Remove Glass Bowl from Mixer
1. Turn speed control to "0" (OFF).
2. Unplug stand mixer.
3. Tilt motor head back.
4. Turn bowl counterclockwise.
2
W11283300A.indb 2
LOCK
UNLOCK
For Frosted and Hammered Bowls only:To
Attach Thread Ring to the Glass Bowl
1. Turn bowl over.
2. Screw the plastic thread ring clockwise
onto the bottom threads of the glass
bowl until it is firmly attached.
To Remove Thread Ring from the
Glass Bowl
1. Turn bowl over.
2. Rotate the thread ring counterclockwise
until it is removed.
3. If the thread ring is too tight, place the
bowl back into the bowl clamping plate
and turn the bowl counterclockwise
until the thread ring is loosened.
7/24/2018 4:44:39 PM