Malossi MULTIVAR Instructions Générales page 19

ATTENTION:
IF YOUR VARIATOR FEATURES A SINTERED
SLIDING BUSH, YOU MUST NECESSARILY
AVOID THE BUSH COMING INTO CONTACT
WITH DEGREASERS.
DO NOT LUBRICATE AND DO NOT CLEAN
SINTERED BUSHES WITH DEGREASERS AND/
OR DILUENTS.
IN CASE OF VARIATORS REQUIRING
LUBRICATION USE EXCLUSIVELY MALOSSI 7.1
MRG GREASE OR MALOSSI 7.1 MHR GREASE
FOR RACING USE.
How do you lubricate the variator?
Technical specifications and size
limits
INNER Ø SINTERED BUSHES
NOMINAL SIZE MAX SIZE ADMITTED
20
22
27
INNER Ø STEEL BUSHES
NOMINAL SIZE MAX SIZE ADMITTED
31
35
38
40
OUTER Ø VARIATOR HUBS
NOMINAL SIZE MAX SIZE ADMITTED
20
22
27
31
35
38
40
19
We hope you found the above instructions
sufficiently clear. However, if any points are not
particularly clear, please contact us completing
the special form inserted in the "contact" section
on our Internet site (malossistore.com). We
thank you in advance for any comments and
suggestions you may wish to send us. So goodbye
20,10
from us all at Malossi, and please accept our
22,10
compliments. Have Fun. GOOD LUCK and ... see
27,12
you next time.
The descriptions in this publication are not
binding. Malossi reserves the right to make
modifications, if it considers them necessary,
31,08
and does not accept any responsibility for any
35,08
typographic or printing errors. This publication
38,10
replaces all previous publications referring to the
40,10
updating matters contained therein.
Warranty
Look up warranty terms in our website
19,96
malossistore.com.
21,95
26,94 These products are reserved solely for races in
locations reserved for those purposes and in
30.94
accordance with the regulations issued by the
34,94
competent authorities for sports events. We
37,94
decline any and all responsibility for improper
39,94
use.