Malossi MULTIVAR Instructions Générales page 16

» continue 5111561
with its hub, paying attention to the side of
fitting.
• Place the rollers in the movable half pulley, the
sliders in the cover and this last one in the half
pulley.
• Put the belt on the hub and fit the movable half
pulley, keeping the rollers blocked in their races.
• Moreover, put the collar and the nut and
locked everything with care, trying not to make
mistakes.
• Where it is provided, fit the small cover with the
3 fastening screws included in the kit.
Fig. 4
Original
washer
7 6 5 4 2 3 1
Malossi
adaptor
8
16