Mitsubishi Electric PAC-SF44SRA Manuel D'utilisation page 26

(2) The interlock setting will be cancelled when the FILTER switch is pressed twice in this state.
7. Searching for interlocked units
Search to find which indoor unit the interlocked unit is linked to.
(1) To search from interlocked unit
Carry out step 4 to display the address No. of the interlocked unit for which the setting is to be
confirmed.
• Select the interlocked unit with the TEMP.
Press the MODE LOCK switch in the above state.
(2) To search from indoor unit
Using steps 2 and 3, display the address No. of the indoor unit for which the interlock setting is
to be confirmed.
• Select the indoor unit with the group selection
ON/OFF switch.
Press the MODE LOCK switch in the above state.
(3) When interlocked unit is set
The address No. and attribute of the linked indoor unit will appear.
The interlocked unit's address No. and attribute will appear.
26
Displays alternately
Displays alternately
The attribute display will change to "--"
when completed normally.
and switchs.
Display the address No. of the interlocked
unit to be searched for.
Either the indoor unit's address No. or
"---" can be displayed at the set temperature display section.
switches or COLLECTIVE
Display the address No. of the
indoor unit to be confirmed.
"---" will appear at the error code
display section.