Initial Operation; Suspending The Tool; Compressed-Air Connection - Orgapack CR 24 A Mode D'emploi Et De Sécurité

ORGAPACK CR 24 A
5

INITIAL OPERATION

5.1 SUSPENDING THE TOOL

The tool is equipped with a universal suspension bow
1
(3/1). It can be suspended on a spring balancer. The
suspension bow is designed to strap the package
horizontal, vertical or side ways.

5.2 COMPRESSED-AIR CONNECTION

Motor and sealing piston are lubricated by oil mist of
the compressed air. Properly prepared compressed air
is therefore essential for trouble-free operation of the
tool. This can only be ensured by a reliably functioning
maintenance unit, consisting of water separator,
pressure reducing valve with pressure gauge and oil
mist lubricator.
The oil mist lubricator should supply sufficient oil. The
length of the hose between the CR 24 A and the main-
tenance unit should not exceed 5 m (15 ft). The inter-
nal diameter of the pipe should be at least 10 mm ( / ").
3
8
It must be ensured that the hose does not form loops,
where oil can collect.
Fig. 3
06.03/WE
21