Initial Operation; Suspending The Tool; Compressed-Air Connection - Orgapack CR 26 A Mode D'emploi Et De Sécurité

ORGAPACK CR 26 A
5

INITIAL OPERATION

5.1 SUSPENDING THE TOOL

The tool is equipped with a universal suspension bow
1
(3/1). It can be suspended on a spring balancer. The
suspension bow is designed to strap the package
horizontal, vertical or side ways.

5.2 COMPRESSED-AIR CONNECTION

Motor and sealing piston are lubricated by oil mist of
the compressed air. Properly prepared compressed
air is therefore essential for trouble-free operation of
the tool. This can only be ensured by a reliably func-
tioning maintenance unit, consisting of water separa-
tor, pressure reducing valve with pressure gauge and
oil mist lubricator.
The oil mist lubricator should supply suffi cient oil.
The length of the hose between the CR 26 A and the
maintenance unit should not exceed 5 m (15 ft). The
internal diameter of the pipe should be at least 10 mm
( 3 / "). It must be ensured that the hose does not form
8
loops, where oil can collect.
Fig. 3
01.08/WE
21