i-tec CHARGER-C100W Mode D'emploi page 9

CHARGER-C100W
- When unplugging the device from the power outlet, pull the plug, not the cable.
- Use only a power adapter supplied by i-tec technologies s.r.o. approved for use with
this device. Use of any other power adapter may cause fire or explosion.
- If you are using the power adapter to power your computer or charge your battery,
place it in a ventilated area, such as on top of a desk or on the floor. Do not cover the
power adapter with paper or other objects that may reduce cooling. Do not use the
power adapter in its carrying case.
- The power adapter may become hot during normal operation of the docking station
or computer.
- Be careful when handling the adapter during or immediately after operation.
- We recommend placing the adapter on the floor or table so that the indicator light
is visible. This way you will know right away when the adapter shuts down due to
external influences. If for some reason the green light goes out, unplug the power
cord from the outlet for 10 seconds and then plug it back in.
- Never use a power adapter that shows signs of damage or excessive wear
FREQUENTLY ASKED QUESTIONS
Available on our website www.i-tec.pro under "FAQ" for this product
ENGLISH
9