Technical Data; Vibration Level; Disposal; Ec-Declaration Of Conformity - Batavia MAXX Série Mode D'emploi

11. Technical data

Mains voltage . . . . . . . . . . 220 –240 V~
Mains frequency . . . . . . . . . . . . . 50 Hz
Power input. . . . . . . . . . . . . . . 1600 W
No-load speed . . . . . . . . . . . . 800 min
Impact rate . . . . . . . . . . . . . 3900 min
Cable length . . . . . . . . . . . . . . . . 3 m
Weight. . . . . . . . . . . . . . . . . . 5.55 kg
Max. drilling diameter
Wood . . . . . . . . . . . . . . . . . 40 mm
Steel . . . . . . . . . . . . . . . . . 13 mm
Concrete . . . . . . . . . . . . . . . 32 mm
Noise and vibration
Hammer position
Sound pressure (L
Acoustic power (L
Uncertainty (K). . . . . . . . . . . . . 3 dB(A)
Vibration main handle. . . . . . 13.412 m/s
Uncertainty (K). . . . . . . . . . . . .1.5 m/s
Hammer/drill position
Sound pressure (L
Acoustic power (L
Uncertainty (K). . . . . . . . . . . . . 3 dB(A)
Vibration main handle. . . . . . 11.523 m/s
Uncertainty (K). . . . . . . . . . . . .1.5 m/s

Vibration level

11.1
The vibration emission level stated in this
instruction manual has been measured in
accordance with a standardised test given
in EN 60745; it may be used to compare one
tool with another and as a preliminary
assessment of exposure to vibration when
using the tool for the applications
mentioned
• using the tool for different applications,
or with different or poorly maintained
accessories, may significantly increase
the exposure level
• the times when the tool is switched off
or when it is running but not actually
doing the job, may significantly reduce
the exposure level
Protect yourself against the effects of vibra-
tion by maintaining the tool and its accesso-
ries, keeping your hands warm, and organiz-
ing your work patterns
7062733-SDS_Plus_Hammerdrill-Ma-1801-08.indb 9
) . . . . . . 93.87 dB(A)
pA
) . . . . . . 104.87 dB(A)
WA
) . . . . . . 96.71 dB(A)
pA
) . . . . . . 107.71 dB(A)
WA

12. Disposal

Do not dispose of electric power
tools with domestic refuse.
The electric power tool is shipped
in packaging to reduce transport damage.
-1
This packaging is a raw material and as
-1
such can either be reused or can be fed
back into the raw material cycle. The elec-
tric power tool and its accessories are
made from various materials such as met-
als and plastics. Take defective compo-
nents to a special refuse collection point.
Ask about these at your specialist shop or
local council.

13. EC-Declaration of conformity

We, the Batavia GmbH, Weth. Buitenhuis-
straat 2a, NL-7951 SM Staphorst, declare
by our own responsibility that the product
SDS Plus Rotary Hammer, Item-No
2
7062733, Model Nr. BT–PD003, is accord-
2
ing to the basic requirements, which are
defined in the European Directives Electro-
magnetic Compatibility 2014/30/EU
(EMC), 2006/42/EC (Machinery) and their
amendments. For the evaluation of con-
2 formity, the following harmonized standards
were consulted:
2
EN 60745-1: 2009+A11;
EN 60745-2-6: 2010;
EN 55014-1: 2006+A1+A2;
EN 55014-2: 2015;
EN 61000-3-2: 2014;
EN 61000-3-11: 2000;
EN 61000-3-3: 2013
Staphorst, 15 January 2018
Meino Seinen, QA Representative
Batavia GmbH, Weth. Buitenhuisstraat 2a,
7951 SM Staphorst, Netherlands
The product and the user manual may be
subject to changes. Technical data may be
changed without prior notice.
English
9
16-03-18 12:42